BM500 · Support
Technical support
Help, troubleshooting and contact details for the BM500 app all live here. Work through the steps below first; if the problem persists, send us the symptoms and the diagnostic log by email.
Contact technical support
We usually reply within 1–2 business days. Including the details below helps us find the cause faster.
Send an email- Support email
- anegine@163.com
- Response time
- 1–2 business days
Please include
- App version (Settings → About)
- Phone model and OS version
- BM500 device ID and a description of the issue
- Steps to reproduce, or the diagnostic log
Getting Started
Getting started
- 01
Install and allow permissions
After installing, allow Bluetooth when the app first launches. On Android 12 and earlier, location permission is also required to scan for devices.
- 02
Connect to BM500
Turn on Bluetooth, make sure the BM500 is powered and within 10 metres, then select it on the scan screen.
- 03
Set up the battery
Choose the battery type, enter capacity, nominal voltage and full-charge voltage, then save to start sampling.
Troubleshooting
Troubleshooting
BM500 not found
Check that the device is powered on with the indicator lit, and that the phone is within 10 metres. Turn Bluetooth off and on, then scan again. If another phone is connected, disconnect it first.
Connection drops frequently
This is usually distance or signal obstruction. Move closer, keep the phone outside metal enclosures and away from strong interference. The app reconnects automatically; if it stays unstable, restart the device and try again.
No data or values not updating
Make sure the device is sampling and reconnect under Device management. If the home screen shows a “last recorded” time, you are looking at an offline snapshot.
Alerts not arriving
Check that notifications are allowed, that Do Not Disturb is not suppressing them, and that the alarm thresholds and delays are set sensibly.
History missing after changing phones
Data stays only on the phone and is not synced to an account. Before switching, export curves to Excel from Trends → Export data; the diagnostic log can be exported separately.
FAQ
Frequently asked questions
Do I need internet or an account?
No. The app talks to the device over Bluetooth only — no network, no account, and sampling works in airplane mode.
Which batteries are supported?
LiFePO4 and lead-acid. Capacity and voltage parameters are configurable in Battery settings.
Is my data uploaded anywhere?
No. Samples, events, alarms and settings are stored only in the local database on your phone.
Is the app free?
Yes, free with no in-app purchases or subscription. The BM500 hardware is sold separately.
Product
Product information
- Applies to
- Anegine BM500 App
- Current version
- v1.0.2 (3)
- System requirements
- Android 7.0+ · iOS 15.5+
- Developer
- Anegine
- Website
- bm500.qletek.com